Table of Contents

Charging the Sensors

Equipment

What is it used for?

This device is used to charge the sensors.

If charging is done with the charging adapter this device is not needed.

How do I connect the charging equipment

Plug the charging adapter as shown in the figure below. The orientation of the plug must be exactly as depicted:

Connecting to the Joulemeter

Connecting to the Liquid Flow Meter

How do I charge my Sensor?

  1. Connect the charging equipment to the power outlet.
  2. Connect the charging equipment to the sensor. :!: Make sure not to bend the pins :!:
  3. Turn on the Sensor (The sensor must be on for the battery to charge.)
  4. (Ignore for LFM) To initiate charging mode on a Joulemeter press the Function button on the Joulemeter for 5sec.
  5. The Sensor's battery LED will be blinking as long as charging is in progress.