User Tools

Site Tools

You are here: Home » Student Documentation » Backbone
student_documentation:bb

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
student_documentation:bb [2021/02/11 17:58] – external edit 127.0.0.1student_documentation:bb [2024/02/15 15:42] (current) – [3D moldel] Melle de Wit
Line 3: Line 3:
 {{:student_documentation:bb.png?nolink&400|}} {{:student_documentation:bb.png?nolink&400|}}
  
-{{:student_documentation:backbone.jpg?nolink&600|}}+{{:student_documentation:backbone_sensorconnection.JPG?nolink&600|}}
  
 ==== Description ==== ==== Description ====
Line 17: Line 17:
 ==== Drawing and Dimensions ==== ==== Drawing and Dimensions ====
 {{ :student_documentation:bbdimension.jpg?nolink&400 |}} {{ :student_documentation:bbdimension.jpg?nolink&400 |}}
 +
 +
 +===== 3D model ====
 +
 +{{url>https://cdn.sem-app.com/stl/BBmockup.html 640,400 noscroll noborder}}
 +
 +[[https://cdn.sem-app.com/stl/BBmockup.stl|Download as STL file]]
 +
 +[[https://cdn.sem-app.com/stl/BBmockup.step|Download as STEP file]]
  
  
Line 46: Line 55:
 Connect the battery holder to the POWER socket. Connect the battery holder to the POWER socket.
  
-Note, the battery and holder provided must only be connected to the OBC.+Note, the [[battery]] and holder provided must only be connected to the OBC.
      
 The pin labelled “E” can be connected to the common ground point in the vehicle. It depends on the individual set up of each vehicle, if this connection is helpful or not. The pin labelled “E” can be connected to the common ground point in the vehicle. It depends on the individual set up of each vehicle, if this connection is helpful or not.
  
-The LEDs will not light up when power is connected. The Backbone‘s electronics will be activated by the Pod during its startup process.+The LEDs will not light up when power is connected. The Backbone‘s electronics will be activated by the Pod during its startup process. (see [[pod#basic_operation|Basic Operation]])
  
  
 === Connecting the Relays  === === Connecting the Relays  ===
-The function of the relays in the Shell Eco-marathon sensor suite is to support the Drivers’ World Championship events. During the Drivers’ World Championship events, the relay will be used to disable the vehicle propulsion system when the allocated amount of vehicle energy has been consumed. +The function of the relays in the Shell Eco-marathon sensor suite is to support the Regional and World Championship events. During the Regional and World Championship events, the relay will be used to disable the vehicle propulsion system when the allocated amount of vehicle energy has been consumed.
  
 The interface to the relay is through a three position terminal block plug. The plug will be provided by Shell at the event. The interface to the relay is through a three position terminal block plug. The plug will be provided by Shell at the event.
Log In (for D&T Team and Volunteers ONLY) student_documentation/bb.1613066314.txt.gz · Last modified: 2021/02/11 17:58 by 127.0.0.1

Page Tools