Differences

This shows you the differences between two versions of the page.

--- student_documentation:bb [2024/01/19 12:22] – Beni Ammann
+++ student_documentation:bb [2024/02/15 15:42] (current) – [3D moldel] Melle de Wit
@@ Line 19: / Line 19: @@
-==== 3D data  =====
+===== 3D model ====
-These files are intendet to help you verifying your design so that the sensor will fit in the car at the event.
+{{url>https://cdn.sem-app.com/stl/BBmockup.html 640,400 noscroll noborder}}
+[[https://cdn.sem-app.com/stl/BBmockup.stl|Download as STL file]]
+[[https://cdn.sem-app.com/stl/BBmockup.step|Download as STEP file]]
-{{ :student_documentation:obc:backbonemockupbody_240119.stl?s=300&color=#5387C0 |STL File}}
@@ Line 51: / Line 55: @@
 Connect the battery holder to the POWER socket.
-Note, the battery and holder provided must only be connected to the OBC.
+Note, the [[battery]] and holder provided must only be connected to the OBC.
 The pin labelled “E” can be connected to the common ground point in the vehicle. It depends on the individual set up of each vehicle, if this connection is helpful or not.
-The LEDs will not light up when power is connected. The Backbone‘s electronics will be activated by the Pod during its startup process.
+The LEDs will not light up when power is connected. The Backbone‘s electronics will be activated by the Pod during its startup process. (see [[pod#basic_operation|Basic Operation]])