Quick Start Guide

1. OBC Pod mounting
The mounting hole is drilled for OBC to have 90° Field of View to the sky. Please observe direction of travel and that both, pitch and roll, don't exceed 20° off horizon.

2. Backbone installation
The Backbone is placed so that 10cm cable can be pulled out of the shaft. Allow for 3 - 4 inches calbel lift available (A “fist” in between)

3. OBC Battery Charging & Mounting
Battery needs to be charged!

4. Joulemeter installation and charging

5. Liquid Flowmeter installation

6. Shutdown Relay wired

7. Quick check before inspection